Corega USB ADSL Modem DSLAAU Manual de usuario

User ManualUSB ADSL ModemDSLAAU

DSLAAU Manual888The software installation procedures vary depending upon the oper-ating system of your PC. Be sure to follow the instructions provided

99DSLAAU Manual9• Encapsulation type * Note: Required if not using default value• Modulation type * Note: Required if not using default valu

DSLAAU Manual10104. A window may be displayed which allows you to specify the location of the driver software to be installed. If so, point to the De

11DSLAAU Manual11• If your DSL service provider is listed and you would like to accept the default values, highlight the provider’s name and click Nex

DSLAAU Manual1212b) Enter/Select the VPI, VCI, Encapsulation type and Modulation type from the “Communication Settings” window and click Next>.

13DSLAAU Manual13 * Note: The encapsulation types that appear in the drop-down list vary depending upon the type of driver selected in the previous st

DSLAAU Manual1414a) Windows 98 WAN applications will ask you to provide telephone number and location information. Enter the information and click <

15DSLAAU Manual15 3.4 MAC OS X InstallationWhen installing corega DSLAAU on a Macintosh running OS X, you will need to install the drivers first, then

DSLAAU Manual161616appear giving you the opportunity to restart your computer. Since you must restart your computer before using your modem, select &l

17DSLAAU Manual174.1 Accessing Communication Settings on WindowsOnce corega DSLAAU and software have been installed, the commu-nication

DSLAAU Manual1818185.1 Windows Drivers UpdateOnce corega DSLAAU has been installed, updating to a new version of the software is an easy process. Simp

1919DSLAAU Manual196.1 Windows Uninstall Remove corega DSLAAU software drivers by performing the follow-ing steps.* Note: The USB cable should not be

DSLAAU Manual202020do so. Unplug the cable and click <OK>.5. The “Finish” screen will appear. The computer must be restarted to complete the un

21DSLAAU Manual213. Type the administrator name and password at the “Authenticate” screen and click <OK>. 4. The “Finish” screen will appear.

DSLAAU Manual222222Modifying TCP/IP Networking Options• WAN USB DriverMicrosoft Windows XPTCP/IP settings are set up automatically during the software

2323DSLAAU Manual234. From the “Networking” tab of the “ Dial-Up PPP Connection Properties” window, select Internet Protocol (TCP/IP) and click <P

DSLAAU Manual2424 5. Use the “Internet Protocol (TCP/IP) Properties” window to modify the IP address and DNS Server addresses as follows:• Change the

25DSLAAU Manual25Microsoft Windows 2000TCP/IP settings are set up automatically during the software installation process. The following procedure may

DSLAAU Manual26265. Use the “Internet Protocol (TCP/IP) Properties” window to modify the IP address and DNS Server addresses as follows:

27DSLAAU Manual27• Change the IP address to a user defined address by selecting Use the following IP address (click inside the circle to the left of i

DSLAAU Manual11. Overview 1.1 About ADSL... 4 1.2 Protocol and Device Driver

DSLAAU Manual28283. From the “Networking” tab of the “ Dial-Up PPP Connection” window, select TCP/IP (marked with a check in the check-box to the lef

29DSLAAU Manual294. Use the “TCP/IP Settings” window to modify the IP address, Name Server addresses and/or default gateway as follows: • Change the

DSLAAU Manual3030Microsoft Windows 98 and Windows 98 SETCP/IP settings are set up automatically during the software installation process. The followin

31DSLAAU Manual31• Change the IP address to a user defined address by selecting Specify an IP address (click inside the radio button to the left of it

DSLAAU Manual3232MAC OS 9.xIf you have not done so yet, connect corega DSLAAU to the computer using the proper USB device cable. Connect the DSL line

33DSLAAU Manual33• Make sure that PPP is selected in the Connect via: drop-down list.• The Configure: drop-down list should show Using DHCP Server.6.

DSLAAU Manual3434* Note: If you do not see the Name and Password fields, click on the small triangle to the left of the word Setup.• Enter your userid

35DSLAAU Manual35MAC OS XIf you have not done so yet, connect corega DSLAAU to the computer using the proper USB device cable. Connect the DSL line t

DSLAAU Manual36363. From the Show pull down menu, select the new port, USB-ADSL Modem.

37DSLAAU Manual374. Select the <Modem> tab. In the Modem pull down menu, select ADSL USB Modem. Uncheck Wait for dial tone before dialing. C

DSLAAU Manual222Appendix A: Modifying TCP/IP Networking Options • WAN USB Driver...

DSLAAU Manual38386. Select the <TCP/IP> tab and select the way you would like to obtain your IP address. The recommended way is Configure Using

39DSLAAU Manual393. The Internet Connection application will display the progress of the connection. Upon completion, you will be connected to the I

DSLAAU Manual4040 4. The “Internet Protocol (TCP/IP) Properties” window is used to modify the IP addresses and DNS Server addresses as follows:

41DSLAAU Manual41• Change the IP address to a user defined address by selecting Use the following IP address option (click inside the circle to the le

DSLAAU Manual42424. Use the “Internet Protocol (TCP/IP) Properties” window to modify the IP addresses and DNS Server addresses as follows:

43DSLAAU Manual43• Change the IP address to a user defined address by selecting Use the following IP address option (click inside the circle to the le

DSLAAU Manual4444 3. From the “IP Address” tab of the “TCP/IP Properties” window, select either the Obtain an IP address Automatically or Specify an I

45DSLAAU Manual454. The “Gateway” tab allows you to add or remove gateways. Consult with your network administrator to determine the appropriate addr

DSLAAU Manual4646Microsoft Windows 98 and Windows 98 SETCP/IP settings are set up during the software installation process. The following procedure ma

47DSLAAU Manual47• To add a new gateway, type the address in the New gateway field and click <Add>. The new gateway will appear in the Installed

33DSLAAU Manual3This manual contains information regarding the installation, opera-tion, and configuration of corega DSLAAU. Additionally, it outlines

DSLAAU Manual4848• Make sure that Ethernet is selected in the Connect via: drop-down list.• The Configure: drop-down list should show Using DHCP Serv

49DSLAAU Manual492. A window should pop up indicating that a new port has been detected. It will be a port of type “Ethernet Adapter” and its interf

DSLAAU Manual50504. The next steps apply if you want to configure using PPPoE (RFC 2516). 5. Select the PPPoE tab and select Connect using PPPoE.6.

51DSLAAU Manual517. If indicated by your ISP, enter any proxies needed at the Proxies tab.8. Click <Apply Now> to apply the changes. Close t

DSLAAU Manual525252provided in Step 5 above; click <Connect>.3. The Internet Connection application will display the progress of the connection

53DSLAAU Manual53Point-to-Point Protocal over EthernetPPPoE (Point-to-Point Protocol over Ethernet) is a specification for connecting multiple computer

DSLAAU Manual545454provided with the third party PPPoE software. The third party soft-ware will search for existing drivers. If multiple drivers are i

55DSLAAU Manual55Specifications• corega DSLAAU Connectorcorega DSLAAU is connected to your PC via a USB cable. The rectan-gular end of the USB cable in

DSLAAU Manual5656Table 2: G.992.2 Payload Bit RatesBit Rate (kb/s)Min MaxDownstream 64 4000Upstream32 1024• Power RequirementsTypical Power Consumpti

57DSLAAU Manual57MAC Operating System• MAC OS 9.x, OS X (10.1.x and above; 10.0 is not supported)• Requires Macintosh USB driver version 1.2 or grea

DSLAAU Manual4441.1 About ADSLAsymmetric Digital Subscriber Line (ADSL) technology provides high-speed data access across regular phone lines (copper

DSLAAU Manual585858corega K.K. designs, develops and markets professional networking products that address the specific needs of small and medium ente

7F., No. 10, Lane 345, YangGuang St. Nei-Hu Chiu, Taipei City 114, Taiwan R.O.C.TEL: +886-2-8751-9164 FAX: +886-2-8751-9174corega Taiwan Inc.www.c

55DSLAAU Manual5Windows 2000, Windows Me, and Windows XP, MAC OS 9.x (RFC 2364 only), MAC OS X 10.1.x and above (RFC 2364 only), as well as Linux.2. L

DSLAAU Manual6661.3 Featurescorega DSLAAU provides the following features:• Compliant with Universal Serial Bus Specification Revision 1.1• USB bus-p

7DSLAAU Manual72.1 Before you start…In MAC operating systems, you need to install the device drivers first (see next chapter) and then perform the hard